Site Search
Used and Discounted Older Euresys Frame Grabbers

matrox frame grabbersLet's make a deal!

These older model, "demo unit", Euresys frame grabbers were used only in our lab. We test them and provide a fix it or money back guarantee on all of them for 3 months. All Euresys Frame Grabbers come with the MultiCam driver and EZ Image Toolset.

 

The list below is not always accurate and changes often. Please contact us in all cases of a need...
Euresys Domino Alpha Rev. A2 Monochrome Analog Image Acquisition Board   Euresys Domino Gamma
Multichannel PCI Frame Grabber for Monochrome Analog Cameras
  Grablink Expert 2 -- High Performance 64-bit, 66 MHz PCI Bus Frame Grabber
Matrox Meteor 2/4 PCI Frame Grabber
Qty: 1
Price: $625.00
List Price: $839..00
Condition: Used but tested
Matrox Meteor 2/4 PCI Frame Grabber
Qty: 1
Price: $1,845.00
List Price: $2,638.00
Condition: Used but tested
Matrox Meteor 2/4 PCI Frame Grabber
Qty: 1
Price: $979.00
List Price: $1399.00
Condition: Used but tested
Features two camera connectors and can acquire images from one dual-tap or two monochrome concurrent analog cameras. This Domino also acquires images from up to four single-tap cameras selectable in twos or two selectable dual-tap cameras. Comes with a 3 month warranty ! High Performance Multi Channel standard and non standard input Analog PCI Frame Grabber with 4 10 Bit A/D converters.  Includes asynchronous reset, shutter control and progressive-scan support.   For demanding industrial applications -- fitted with two Camera Link® connectors. It acquires images simultaneously and independently from two line-scan or area-scan digital cameras in a dual Base configuration. It also supports one camera in the Medium configuration.

Features:

  • Support of monochrome analog cameras (single or dual-tap)
  • Two 8-bit 32 MHz A/D converters
  • High-resolution, typically 1300 x 1030
  • Independent camera control: 2 timing generators, 2 trigger & strobe lines 

Features:

  • Support of monochrome (single or dual-tap) and RGB analog cameras
  • Four 10-bit 40 MHz A/D converters
  • High resolution, typically 1300 x 1030
  • Independent camera control: 3 timing  generators, 3 trigger & strobe lines  

Features:

  • Dual Base or Medium configurations
  • 48 bits at 60 MHz
  • 16-MByte on board memory
  • Form factors:  
    -- Desktop PCI 64-bit 66 MHz bus
    -- 6U/4HP Compact PCI 64-bit 66 MHz  bus
Picolo Pro 3I
Full-Featured
Expandable Acquisition Board
Picolo Pro 2 -- Standard Acquisition for Video Surveillance Picolo MIO I/O Expansion Module for Picolo Pro 3, Tetra, and Jet-X
Matrox Meteor 2/4 PCI Frame Grabber
Qty: 1
Price: $200.00
List Price: $268.00
Condition: Used but tested
Matrox Meteor 2/4 PCI Frame Grabber
Qty: 1
Price: $130.00
List Price: $187.00
Condition: Used but tested
Matrox Meteor 2/4 PCI Frame Grabber
Qty: 2
Price: $95.00
List Price: $128.00
Condition: Used but tested
An expandable PCI capture board designed for multiple-camera systems addressing video surveillance and security applications. Picolo Pro 3 supports the acquisition of full resolution color images including the square-pixel resolution (640 x 480 or 768 x 576). The leading PCI capture board specifically designed for video surveillance applications with multiple cameras. Picolo Pro 2 supports the acquisition of full resolution color images including the square-pixel resolution (640 x 480 or 768 x 576).  MIO is an element of the PICOLO modular architecture. It brings to the PICOLO Pro 3 and the PICOLO Tetra flexible isolated logic inputs and outputs.  

Features:

  • Expandable architecture up to 16 cameras  
  • Video modules for 4 cameras or for 12 cameras in one slot  
  • MIO isolated I/O modules  
  • Quick switching for superior frame rate  
  • Highest image quality 

Features:

  • Suitable for 4 camera systems -- Captures up to 4 composite video signals directly through standard BNC inputs
  • Quick switching for superior frame rate
  • Highest image quality
  • Optimized for video surveillance
  • Software support: 
    -- DirectShow filters 
    -- MultiCam drivers

Features:

  • 4 input and 4 output isolated lines 
  • Alarm or Watchdog signaling features 
  • Removable screw-terminal block 
  • Monitoring LEDs 
  • MultiCam drivers for Microsoft Windows® and Linux
Euresys Pro 3I Module for Picolo --  
Adds Four Video Inputs
Euresys Digital 16 LVDS Acquisition Module with 16 Digital Video Inputs eVision 6.0 Image Analysis Software and Parallel Port Dongle
Matrox Meteor 2/4 PCI Frame Grabber
Qty: 3
Price: $70.00
List Price: $99.00
Condition: Used but tested
Matrox Meteor 2/4 PCI Frame Grabber
Qty: 1
Price: $699.00
List Price: $999.00
Condition: Used but tested
Matrox Meteor 2/4 PCI Frame Grabber
Qty: 1
Price: $3598.00
List Price: $5140.00
Condition: Used but tested
Up to three Modules Pro 3I can be connected to the Picolo Pro 3I capture board. Picolo Pro 3I and Modules Pro 3I are fitted each with four BNC's for video inputs and one RJ-45 connector for I/O connectivity. Up to three Modules Pro 3 are supported. For use with the EureCard Multi series. 16-bit LVDS input at 40 MHz. Unique suite of software tools for industrial machine vision and general purpose imaging applications, plus memory dongle to store license. 

Features:

  • Four BNC for video inputs
  • One RJ-45 connector for I/O connectivity
  • Interconnection flat cable is provided with each Module Pro 3I

Features:

  • 16 differential digital video input lines with LVDS levels
  • Up to 40 MHz pixel clock
  • 68-pin Micro-SubD camera connector including camera control signals (for two cameras), 16 data lines, 4 opto-isolated trigger/strobe lines and an isolated 5 V power supply
  • DB9 system connectors including 4 opto-isolated trigger/strobe lines and an isolated 5 V power supply

Features:

  • Easy to learn and use
  • Robust and highly accurate
  • Optimized for MMX
  • Compatible with Windows (95, 98, 2000, NT, XP) and Linux
  • Compatible with Microsoft Visual Basic, Microsoft Visual C++, Borland C++, C++ Builder and Delphi
  • Rapid application prototyping
|
Consulting
|
|
|
|
News
|

 

ImageOps, Division of Computer Modules, Inc.
11409 West Bernardo Court * San Diego, CA 92127 Phone: (858) 613-1818 * Fax: (858) 613-1815
_________________________________________________________________________________
© 2019 ImageOps.com. All rights reserved.