Let's make a deal!

Here are more bargain-priced cameras and accessories.  Some are evaluation units that were not purchased, others were used in our lab or for trade shows.  All of them are tested and in excellent condition.

The list below is not always accurate and changes often. Please contact us in all cases of a need…

Compact Progressive Scan Monochrome Camera

Micro Head Color Camera

Industrial Monochrome CCD Camera

Features:

• Compact size 1/3” progressive scan monochrome CCD camera
• 659 (h) x 494 (v) square pixels (VGA format)
• Single channel video output
• High S/N ratio >56 dB
• Extended range of functions and options compared with CV-M10
• Shutter speeds from 1/30 to 1/100,000 second in 15 steps in normal mode
• Shutter speeds from 1/30 to 1/10,000 second in 10 steps in trigger mode
• Programmable exposure
• Partial scanning 1/2, 1/3 and 1/6 for higher frame rates
• Internal, external HD/VD or random trigger synchronization
• Edge pre-select, pulse width control, start/stop trigger modes
• Long time exposure with external VD pulse interval
• Frame-delay readout in connection with pulse width controlled shutter
• Exposure enable EEN, write enable WEN and pixel clock output
• Short ASCII commands for fast mode setup via serial port
• Setup by Windows NT/2000/XP software via RS 232C

Features:

• Complete series with 1/2" or 1/3" color Hyper HAD IT CCDs
• Remote head with 017 or 012 mm housing, 2 or 5m cable
• PAL: 752 (h) x 582 (v) pixels. NTSC: 768 (h) x 494 (v) pixels
• Improved sensitivity and image performance
• Based on latest Digital Signal Processing (DSP)
• H and V enhancer for sharp detailed image via RS 232C setup
• VBS, Y/C and RGB video output
• Positive / negative color reversal
• Shutter speed 1/50 (1/60 NTSC) to 1/10,000 second
• Internal/external synchronizing with composite video signal
• On-screen menu for fast camera setup
• OEM versions with 4 frames memory
• Remote setup by RS 232C or remote control unit
• Windows 95/98/NT setup software

Features:

• New improved monochrome 2/3" Hyper HAD IT CCD sensor
• CCIR: 752 (h) x 582 (v) pixels. EIA: 768 (h) x 494 (v) pixels
• Increased sensitivity and improved dynamic range
• Reduced smear level
• High S/N ratio > 58 dB
• Interlaced or non-interlaced scanning
• Field or frame integration mode
• Asynchronous reset (two trigger modes)
• Long time exposure with external VD pulses
• HD/VD synchronization input or output – TTL level
• Exposure enable (EEN) and write enable (WEN) output
• Sub-pixel accuracy possible
• Frame grabber friendly interface
• Rugged and compact construction

Industrial Monochrome CCD Camera

Near IR Industrial CCD Camera

Remote Head Monochrome CCD Camera

Features:

• High resolution monochrome 1/2" Hyper HAD IT CCD sensor
• CCIR: 752 (h) x 582 (v) pixels. EIA: 768 (h) X 494 (v) pixels
• Extreme sensitivity
• Improved dynamic range and smear performance
• High S/N ratio >56 dB
• Interlaced or non-interlaced scanning
• Field or frame integration mode
• Electronic or asynchronous shutter
• Long time exposure with external VD pulses
• HD/VD synchronization input or output. – TTL level
• Exposure enable (EEN) and write enable (WEN) output
• Sub-pixel accuracy possible
• Frame grabber friendly interface
• Rugged and compact construction

Features:

• High resolution monochrome 1/2" Hyper HAD IT CCD sensor
• CCIR: 752 (h) x 582 (v) pixels. EIA: 768 (h) X 494 (v) pixels
• Extreme sensitivity
• Improved dynamic range and smear performance
• High S/N ratio >56 dB
• Interlaced or non-interlaced scanning
• Field or frame integration mode
• Electronic or asynchronous shutter
• Long time exposure with external VD pulses
• HD/VD synchronization input or output. – TTL level
• Exposure enable (EEN) and write enable (WEN) output
• Sub-pixel accuracy possible
• Frame grabber friendly interface
• Rugged and compact construction

Features:

• High resolution monochrome 1/2" Hyper HAD IT CCD sensor
• CCIR: 752 (h) x 582 (v) pixels. EIA: 768 (h) x 494 (v) pixels
• Remote head ø28. C-mount. o.5 m or 2 m cable lengths
• Improved dynamic range and smear performance
• Extreme sensitivity. High S/N ratio >56 dB
• Interlaced or non-interlaced scanning
• Field or frame integration mode
• Electronic shutter or asynchronous trigger shutter
• Continuous variable shutter in trigger mode 2
• Long time integration with external VD pulses
• HD/VD synchronization input or output – 75 Ohm or TTL level
• Exposure Enable (EEN) and Write Enable (WEN) output
• Sub-pixel accuracy possible
• Frame grabber friendly interface
• Camera functions and housing identical with CV-M50

DSP Micro Color CCD Camera

High Resolution DSP Color & B/W Camera

Features:

• Extremely compact self contained color camera ø17 x 115.8 mm
• Super high sensitive 1/2” color CCD Camera
• PAL: 752 (h) x 582 (v) pixels. NTSC: 768 (h) x 494 (v) pixels
• 450 TV lines resolution
• Based on latest Digital Signal Processing (DSP)
• Set up by RS 232C
• VBS and Y/C video output
• Positive/negative color reversal on Y/C video
• Back light compensation with selectable patterns
• Shutter up to 1/10,000 sec., auto shutter and flickerless
• Horizontal scan reversal. (Mirrored image)
• RS 232C interface/Windows 95/98/NT set up software

Features:

• High resolution
• Digital Signal Processing (DSP)
• Back Light Compensation (BLC)
• RS 232C control and set-up option
• On-screen control with CR 1000 remote

1/4 Inch Color CCD video camera with motorized 220X zoom

Medium resolution color video camera

Features:

• NTSC
• Auto or Manual Focus
• Resolution: 480 TV Lines

Features:

• NTSC
• 537(H) X 505(V)
• Resolution: 480 TV Lines