Easy To Use
BrightEye 92-A will downconvert any type of HD signal
and provides both an SD SDI
output and an analog composite output that are suitable
for broadcast or monitoring. The built-in Frame Synchronizer
allows you to feed asynchronous signals to the BrightEye
92-A. An external reference input allows genlock to
a house reference. All vertical interval data and closed
captioning is faithfully passed.
Downconverting to Standard Definition
BrightEye 92-A will downconvert any type of HD signal
and provides both an SD SDI
and an analog composite output suitable for broadcast
or monitoring.
Audio Processing
BrightEye 92-A handles both embedded audio and analog
audio. Sixteen channels of embedded audio are supported
in BrightEye 92-A. If the incoming video has embedded
audio, the audio will be safely bypassed around the
video processing and lipsync will be preserved. Audio
mixing is available for two of the four embedded groups
of audio.
Audio Monitoring
Audio monitoring is easy with BrightEye 92-A’s
convenient 3.5mm mini jack. Select the audio channels
you want to monitor from the front panel and plug in
a headset.
Monitoring with HDMI
The HDMI connector on the
rear of the unit provides a future proof monitoring
interface. Plug it into most LCD
monitors for confidence monitoring of your feed.
Front Panel and Software Control
Input selection, gain control, and ftest pattern controls
are provided through the front panel interface. Audio
presence LEDs indicate which
channels are detected. Controls for crop, letterbox
and pillarbox are accessed from the front panel or BrightEye
Mac or PC software. Video and audio levels and the audio
mixer can be adjusted through BrightEye Mac or PC software.
BrightEye 92-A Specifications
Serial Digital Input
- Number: One
- Signal Type: 1.485Gb/s HD Serial Digital (SMPTE
274M or 296M)
- Impedance: 75 O
- Return Loss: >15dB
- Max Cable Length: 100 meters for 1.485 Gb/s
Reference Input
- Number: One
- Type: 1 V p-p Composite Video, PAL
or NTSC, or Tri-Level Sync
- Impedance: 75 O
- Return Loss: >40 dB
Analog Video Output
- Number: One
- Type: Composite PAL or
NTSC
- Return Loss: >40 dB
- Output DC: <100 mV
Serial Digital Output
- Number: Two
- Type: SD Serial Digital 270Mb/s (SMPTE
259M-C)
- Processing: 12 and 16 bit
- Impedance: 75 O
- Return Loss: >15 dB
- Max Cable Length: 300 Meters
- HD Standards Supported:
- 1080i (SMPTE 274M
-4,5,6) 50, 59.94 or 60 Hz
- 720p (SMPTE 296M -1,2,3)
50, 59.94 or 60 Hz
- 1080p (SMPTE 274M
-9,10,11) 23.98,24, 25 Hz
- 1080sF (RP211 -14,15,16) 23.98, 24, 25Hz
Analog Audio Inputs
- Number: Eight (selectable as inputs or outputs)
- Type: Balanced
- Impedance: >15K O
- Max Input Level: 24 dBu
- CMRR: >60dB, 20Hz
to 10KHz
- Quantization: 24 bits, 128x Oversampled
- Sample Rate: 48 KHz
- Reference Level: -10 dBu or +4 dBu
- Frequency Response: ±0.1dB, 20Hz to 20KHz
- Crosstalk: <106 dB
- Dynamic Range: >106 dB
Analog Audio Outputs
- Number: Eight (selectable as inputs or outputs)
- Type: Balanced, transformerless
- Impedance: 30 O
- Maximum Output Level: 24 dBu
- Resolution: 24 bits, 128x Oversampled
- Reference Level: -10 dBu or +4 dBu
- Frequency Response: ± 0.1dB, 20Hz to 20KHz
- Crosstalk: <106 dB
- Dynamic Range: >106 dB
Embedded Output (In Serial Output)
- Group Assign: Two of four groups
- Channels: Sixteen passed
- Bit Depth: 24 Bit
Monitor Output
- Number: One
- Connectorization: HDMI
Audio Monitoring Output
- Number: One (Select from eight channels)
- Connectorization: 3.5mm stereo mini jack
General Specifications
- Size: 5.625" W x 1.7" H x 5.5" D (143 mm x 40 mm
x 140 mm) including connectors
- Power: 12 volts, 7 watts (100-230 VAC
modular power supply not included)
- Temperature Range: 0 to 40° C ambient
- Relative Humidity: 0 to 95° non-condensing
|