|
| BW-100SV |
BW-100STV & BW-100SRV are HDMI & HD-SDI Wireless Transmitter and Receiver using H.264 codec, which comes with built-in V-Mount plates. By attaching a V-Mount battery, it supplies power to the attached camera as well. These transmitter & receiver can be used with another type of transmitter & receiver (BW-100ST or BW-100SR). If the user wants to use multiple receivers, maximum 4 receivers can be connected to a transmitter. |
 |
- Distance up to 500m (1600 feet, with Directional Antenna)
- Transmits Multi Format Video Signal (~ 1080p/60)
- Max 50 Mbps Encoding Bitrate
- Supports 3G HD-SDI
- Transmits Audio Input (Line Level Stereo Mic In)
- Real Time Transmitter Selection
- Bi-Directional Data Link at 11 Kbps
- Supports Time Code
- Tally Control (Tally LED, Return Tally) via GPIO Port
- Low Power Consumption (10W)
- Automatic Encoding Rate Adjustment for RF Condition
- Signal Protection with 802.11i
- No Special FCC License (U-NII-1 and U-NII-3) required
- The Adoption of MIMO
- Automatically Detects HD-SDI / SD-SDI
|
Full HD A/V Transmission up to 150 Meters
Transmits 1920 x 1080 Full HD video up to 150M (500 feet) in best condition when there's no obstacle and in clear weather, etc.
A/V Transmitted through Obstacles
When you are out of sights, the signal might still reach through obstacles.
|
Specifications
BW-100STV
Input |
| 1 x BNC |
HD/SD-SDI, 3G/1.485G/270M |
| 1 x HDMI |
HDMI, (with HDCP v.1.1), 19 pin Female |
Audio Input |
| 1 x Phone Jack In |
3.5 mm TRS, Line Level Input |
Video Formats |
| HD |
1920 x 1080 (60p, 59.94p, 50p)
1920 x 1080 (60i, 59.94i, 50i, 30p, 29.97p, 25p, 24p, 23.98p)
1920 x 1080 (30psf, 29.97psf, 25psf)
1280 x 720 (60p, 59.94p, 50p)
|
| SD |
NTSC, PAL |
Output |
| 1 x BNC |
SDI Active Loop Output |
Radio |
| Frequency |
U-NII-1(5.15~5.25 GHz), U-NII-3(5.725~5.85 GHz |
| Transmission Power |
20mW (13.5 dBm) |
| Transmission Distance |
150m (500 feet), 500m (1600 feet, with special antenna) |
| Latency |
20 ms |
| Encoding/Decoding |
H.264 Base Profile @4.2 |
| Antenna |
2T x 2R SMA Female |
| Security |
802.11i compatible signal protection by 128 bit AES encryption |
| Multiple Receivers |
up to 4 (Maximum distance may decrease due to signal division) |
General |
| 1 x GPIO |
GPI-7 Port, RJ-45P Jack |
| 2 x mini_USB |
F/W Update (MAIN , MICOM) |
| 4 x LED |
Power, Link, Battery, Tally |
| 4 x Switch |
Reset, Pairing, Input Selection, Power |
| Battery |
V-Mount |
| Power Requirements |
DC (7V~17V) or AC Adaptor (100 ~ 230V, 50 Hz/60 Hz) |
| Power Consumption |
10W |
| Operating Temperature |
0°C ~ 40°C (32°F ~104°F) |
| Operating Humidity |
20% ~ 80% RH |
| Weight |
1.02kg |
| Dimensions |
152.2 x 90.0 x 42.2 mm (5.9 x 3.5 x 1.6 inches) |
BW-100SRV
Output |
| 2 x BNC |
HD/SD-SDI, 3G/1.485G/270M |
| 1 x HDMI |
HDMI Out |
General |
| 1 x IR |
Remote Control Unit |
| 1 x GPIO |
GPI-7 Port, RJ-45P Jack |
| 1 x mini USB |
for Firmware Update |
| 4 x LED |
Power, Link, Battery, Tally |
| Battery |
V-Mount |
| Power Requirements |
DC (7V~17V) or AC Adaptor (100 ~ 230V, 50Hz/60Hz) |
| Power Consumption |
9W |
| Operating Temperature |
0°C ~ 40°C (32°F ~104°F) |
| Operating Humidity |
20% ~ 80% RH |
| Weight |
1.02kg |
| Dimensions |
152.2 x 90.0 x 42.2 mm (5.9 x 3.5 x 1.6 inches) |
※ These specifications are subject to change without prior notice. |
