Site Search
Distribution, conversion or transmission of television and computer video signals, including fiber optic transmission systems, scan converters and video scalers



Data Sheet 7410

Manual 7410

Pure Digital Fiberlink® 7400 Composite Video Series (7410)

The Pure Digital Fiberlink® 7400 Series digitally transmits four composite video channels and bidirectional data over multimode or single mode fiber at 850, 1310 or 1550 nm at 7 MHz video bandwidth using one or two fibers. The video channel is compatible with NTSC, PAL or SECAM video standards. Bidirectional data channel supports RS-232, RS-422 and RS-485 protocols for use with most PTZ systems. Transmitter and receiver may be configured differently.

Pure Digital Fiberlink® 7400 Composite Video Series (7410)

No adjustments and pure digital processing and transmission make the 7400 Series ideal system for PTZ Camera Control in remote venues, surveillance, security, casinos, government installations and military applications.



  • Built-in diagnostic LEDs for video signals, data signal and power
  • Wide range power supply allows operation from low voltage AC and DC sources
  • System consists of transmitter and receiver unit; card or box version
  • Each end, plus power supply, must be purchased separately
  • One-fiber card version fills one slot in 6000A card cage.Two-fiber version fills two slots


  • Casinos
  • Government Installations
  • Industrial Security
  • Military
  • PTZ Camera Control
  • Security
  • Surveillance
  • Traffic and Control


Home | Consulting | Company | Ordering Info | Support | News | Contact Us

ImageOps, Division of Computer Modules, Inc. • 11409 West Bernardo Court • San Diego, CA 92127 • Phone: (858) 613-1818 • Fax: (858) 613-1815

© 2021 All rights reserved.