Name

Specifications

Image Sensor 1/2.5” 5Mpixel CMOS; (Aptina: MT9P031/12STM)
Active Picture Element 2592 (H) x 1944 (V)
Cell Size 2.2 (H) x 2.2 (V) µm
Scanning System Progressive
Shutter Type Rolling Shutter
Scanning Methods Full Scanning. Variable AOI (Horizontal/Vertical)
Maximum Frame Rate -
- 14 fps @ QSXGA (2592 x 1944)
- 21 fps @ QXGA (2048 x 1536)
- 31 fps @ UXGA (1600 x 1200)
- 42 fps @ SXGA (1280 x 1024)
- 63 fps @ XGA (1024 x 768)
- 90 fps @ SVGA (800 x 600)
- 123 fps @ VGA (540 x 480)
Sync System Internal
Video Output B GR-8bit; RAW 8bit/10bit/12bit.; Mono8bit/10bit/12bit
S/N Ratio ≤ 4 Digit (Gain 0 dB)
Minimum Scene Illumination 9.0 Lux @ F1.2
ALC Auto Shutter /Auto Gain
Electronic Shutter Free-run Mode: Exposure Time -- 32 µsec to 38sec (in full scanning mode) Edge Preset Trigger Mode: Exposure Time -- 32 µsec to 38sec (in full scanning mode) Pulse-width Trigger Mode: Exposure Time -- 32 µsec to unlimited (in full scanning mode)
Gain -
- Analog 0 to 26.97 dB
- Digital 0 to 12.04 dB
Digital Clamp 0 to 255 (LSB of 12bit output)
Gamma 0.1 to 4.0 (settable with 0.1 step)
AOI Function AOI (Horizontal: 32 to 2592 pixels / Vertical: 32 to 1944 lines); Adjustable Steps: 4 pixels in horizontal direction and 4 lines in vertical direction
Binning Horizontal 1/2, 1/4 Vertical 1/2, 1/4 *Only pixels in the horizontal direction can be added to increase the brightness.
Skipping Horizontal 1/2, 1/3, 1/4, 1/5, 1/6, 1/7 Vertical 1/2, 1/3, 1/4, 1/5, 1/6, 1/7, 1/8
Mirror Image Horizontal / Vertical / Horizontal and Vertical
Pixel Blemish Correction Up to 64 pixels (This function is turned off at shipping.)
White Balance Auto / Manual / One shot
Operation Mode Free-run / Edge preset trigger / Pulse width trigger / Start and Stop trigger
Frame Memory 1 frame (2592 x 1944)
Input / Output USB 3.0 Super Speed (USB 3.0 Micro B)
Power -
- Input Voltage +5V (typ.) (Conform to USB Standard)
- Consumption Less than 2.0 W
Dimensions 28 (W) x 28 (H) x 33.8 (D) mm (excluding connector)
Lens Mount CS Mount
Optical Filter IR Cut Filter
Optical Center Accuracy Positional accuracy in H and V directions: +/- 0.5 mm Rotational accuracy of H and V: +/- 0.35 deg.
Weight Approximately 38 g
Interface Connector USB: USB3 Micro-B USB connector; IO signal: 6pin connector (HR10A-7R-6PB or equivalent) (2 inputs/ 2 outputs)
Operating Temperature 0 to 40 deg. C
Storage Temperature -30 to 65 deg. C
Vibration 20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each
Shock Acceleration 38G, half amplitude 6ms, 3 directions 3 times each
Standard Compliancy EMS: EN61000-6-2, EMI: EN55011
RoHS RoHS compliant