Name |
Specifications |
Image Sensor |
1/2.5” 5Mpixel CMOS; (Aptina: MT9P031/12STM) |
Active Picture Element |
2592 (H) x 1944 (V) |
Cell Size |
2.2 (H) x 2.2 (V) µm |
Scanning System |
Progressive |
Shutter Type |
Rolling Shutter |
Scanning Methods |
Full Scanning. Variable AOI (Horizontal/Vertical) |
Maximum Frame Rate |
- |
- 14 fps @ |
QSXGA (2592 x 1944) |
- 21 fps @ |
QXGA (2048 x 1536) |
- 31 fps @ |
UXGA (1600 x 1200) |
- 42 fps @ |
SXGA (1280 x 1024) |
- 63 fps @ |
XGA (1024 x 768) |
- 90 fps @ |
SVGA (800 x 600) |
- 123 fps @ |
VGA (540 x 480) |
Sync System |
Internal |
Video Output |
RAW 8bit/10bit/12bit |
S/N Ratio |
≤ 4 Digit (Gain 0 dB) |
Minimum Scene Illumination |
0.3 Lux @ F1.2 |
ALC |
Auto Shutter /Auto Gain |
Electronic Shutter |
Free-run Mode: Exposure Time -- 32 µsec to 38sec (in full scanning mode) Edge Preset Trigger Mode: Exposure Time -- 32 µsec to 38sec (in full scanning mode) Pulse-width Trigger Mode: Exposure Time -- 32 µsec to unlimited (in full scanning mode) |
Gain |
- |
- Analog |
0 to 26.97 dB |
- Digital |
0 to 12.04 dB |
Digital Clamp |
0 to 255 (LSB of 12bit output) |
Gamma |
0.1 to 4.0 (settable with 0.1 step) |
AOI Function |
AOI (Horizontal: 32 to 2592 pixels / Vertical: 32 to 1944 lines); Adjustable Steps: 4 pixels in horizontal direction and 4 lines in vertical direction |
Binning |
Horizontal 1/2, 1/4 Vertical 1/2, 1/4 *Only pixels in the horizontal direction can be added to increase the brightness. |
Skipping |
Horizontal 1/2, 1/3, 1/4, 1/5, 1/6, 1/7 Vertical 1/2, 1/3, 1/4, 1/5, 1/6, 1/7, 1/8 |
Mirror Image |
Horizontal / Vertical / Horizontal and Vertical |
Pixel Blemish Correction |
Up to 64 pixels (This function is turned off at shipping.) |
White Balance |
N/A |
Operation Mode |
Free-run / Edge preset trigger / Pulse width trigger / Start and Stop trigger |
Frame Memory |
1 frame (2592 x 1944) |
Input / Output |
USB 3.0 Super Speed (USB 3.0 Micro B) |
Power |
- |
- Input Voltage |
+5V (typ.) (Conform to USB Standard) |
- Consumption |
Less than 2.0 W |
Dimensions |
28 (W) x 28 (H) x 33.8 (D) mm (excluding connector) |
Lens Mount |
CS Mount |
Optical Filter |
No IR Cut Filter |
Optical Center Accuracy |
Positional accuracy in H and V directions: +/- 0.5 mm Rotational accuracy of H and V: +/- 0.35 deg. |
Weight |
Approximately 38 g |
Interface Connector |
USB: USB3 Micro-B USB connector; IO signal: 6pin connector (HR10A-7R-6PB or equivalent) (2 inputs / 2 outputs) |
Operating Temperature |
0 to 40 deg. C |
Storage Temperature |
-30 to 65 deg. C |
Vibration |
20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each |
Shock |
Acceleration 38G, half amplitude 6ms, 3 directions 3 times each |
Standard Compliancy |
EMS: EN61000-6-2, EMI: EN55011 |
RoHS |
RoHS compliant |