Name |
Specifications |
| Model No | STC-TC83USB-A |
| Imager | ⅓” Interline XGA Color Progressive CCD: ICX204AK |
| Total Picture Element | 1077 (H) x 788 (V) |
| Active Picture Element | 1034 (H) x 779 (V) |
| Chip Size | 5.80 (H) x 4.92 (V) mm |
| Cell Size | 4.65 (H) x 4.65 (V) µm |
| Scanning System | Progressive |
| Scanning Methods | Full Scanning, 1/1 Partial Scanning, ½ Partial Scanning, ¼ Partial Scanning, Variable Partial Scanning |
| Pixel Frequency | 29.5 MHz (Normal) / 14.75 MHz (1/2 clock) / 7.375 MHz (1/4 clock) |
| Maximum Frame Rate | |
| - Full Scanning | 29.18 fps (Normal) / 14.59 fps (1/2 clock) / 7.295 fps (1/4 clock) |
| - 1/2 Partial | 60.02 fps (Normal) / 30.01 fps (1/2 clock) / 15.00 fps (1/4 clock) |
| - 1/4 Partial | 120.35 fps (Normal) / 60.175 fps (1/2 clock) / 30.087 fps (1/4 clock) |
| Resolution | 1024(H) x 768(V) (Full Scanning) 1024 (H) x 344 (V) (1/2 Partial Scanning) 1024 (H) 136 (V) (1/4 Partial Scanning) |
| Minimum Scene Illumination | 1.5 Lux at F1.2 |
| Sync System | Internal |
| Electronic Shutter | Auto / Manual (software selectable) |
| Gain | Auto / Manual (software selectable) |
| Gamma | Manual (software selectable) |
| White Balance | Auto / Manual / One shot (software selectable) |
| Trigger Mode | Free-run / Edge preset trigger / Pulse Width Trigger / Start & Stop Trigger (Software Selectable) |
| Input / Output | USB 2.0 High Speed |
| Power | |
| - Input Voltage | +5 V through USB connector |
| - Consumption | Less than 320 mA |
| Dimensions | |
| - AS Model | 51 (W) x 51 (H) x 44.3 (D) mm |
| - AT Model | 51 (W) x 51 (H) x 41.6 (D) mm |
| Lens Mount | CS Mount |
| Tripod | 2 screws on the bottom plate |
| Weight | Approximately 145g |
Temperature |
|
| - Operational | 0 to 40 deg C |
| - Storage | -30 to 65 deg C |
| Vibration | 20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each |
| Shock | Acceleration 70G, half amplitude 6ms, 3 directions 3 times each |
| Standard Compliancy | EMS :EN61000-6-2, EMI :EN61000-6-3 (Class B) |
| RoHS | RoHS Compliant |