Name

Specifications

Model No STC-TC202USB-ASH
Imager 1/1.8” Interline UXGA Color Progressive CCD: ICX274AQ
Total Picture Element 1688 (H) x 1248 (V)
Active Picture Element 1600 (H) x 1200 (V)
Chip Size 8.50 (H) x 6.80 (V) mm
Cell Size 4.40 (H) x 4.40 (V) μm
Scanning System Progressive
Scanning Methods Full Scanning, 1/1 Partial Scanning, ½ Partial Scanning, ¼ Partial Scanning, Variable Partial Scanning
Pixel Frequency 36.818 MHz
Maximum Frame Rate
- Full Scanning 15.32 fps
- 1/2 Partial 30.63 fps
- 1/4 Partial 61.27 fps
Resolution Full Scanning: 1600 (H) x 1200 (V) 1/2 Partial Scanning: 1600 (H) x 544 (V) 1/4 Partial Scanning: 1600 (H) x 208 (V)
S/N Ratio (Standard Deviation) ≤ 10 digit (Factory Default Gain Setting)
Minimum Scene Illumination 1.39 Lux at F1.2
Sync System Internal
Electronic Shutter Auto / Manual (software selectable)
Gain Auto / Manual (software selectable)
Gamma Manual (software selectable)
White Balance Auto / Manual / One shot (Software Selectable)
Trigger Mode Free-run / Edge preset trigger / Pulse Width Trigger / Start & Stop Trigger (Software Selectable)
Input / Output USB2.0 High Speed (Mini B USB)
Consumption Less than 500 mA
Dimensions 50 (W) x 50 (H) x 40.8 (D) mm
Lens Mount C Mount
Input / Output Connector 12 Pin Connector (Hirose) / 2.5 mm Pin Jack
Tripod 2 screws on bottom of plate
Weight Approximately 112g
Temperature
- Operational Temperature: 0 to 40 deg C; Relative Humidity: 0 to 85% (No condensation)
- Storage Temperature: -30 to 65 deg C; Relative Humidity: 0 to 85% (No condensation)
Vibration 20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each
Shock Acceleration 70G, half amplitude 6ms, 3 directions 3 times each
Standard Compliancy EMS :EN61000-6-2, EMI :EN61000-6-3 (Class B)
RoHS RoHS Compliant