Name

Specifications

Model No STC-TB83USB-AH
Imager ⅓” Interline XGA Monochrome Progressive CCD: ICX204AL
Total Picture Element 1077 (H) x 788 (V)
Active Picture Element 1024 (H) x 768 (V)
Chip Size 5.80 (H) x 4.92 (V) mm
Cell Size 4.65 (H) x 4.65 (V) µm
Scanning System Progressive
Scanning Methods Full Scanning, 1/1 Partial Scanning, ½ Partial Scanning, ¼ Partial Scanning, Variable Partial Scanning, Binning, Binning 1/1 Partial Scanning, Binning ½ Partial Scanning, Binning ¼ Partial Scanning, Binning Variable Partial Scanning
Pixel Frequency 29.5 MHz (Normal) / 14.75 MHz (1/2 clock) / 7.375 MHz (1/4 clock)
Maximum Frame Rate
- Full Scanning 29.18 fps (Normal) / 14.59 fps (1/2 clock) / 7.295 fps (1/4 clock)
- 1/2 Partial 60.02 fps (Normal) / 30.01 fps (1/2 clock) / 15.00 fps (1/4 clock)
- 1/4 Partial 120.35 fps (Normal) / 60.175 fps (1/2 clock) / 30.087 fps (1/4 clock)
Resolution 1024 (H) x 768 (V) (Full Scanning) 1024 (H) x 344 (V) (1/2 Partial Scanning) 1024 (H) x 136 (V) (1/4 Partial Scanning)
S/N Ratio (Standard Deviation) ≤ 10 digit (Factory Default Gain Setting)
Minimum Scene Illumination 0.11 Lux at F1.2
Sync System Internal
Electronic Shutter Auto / Manual (software selectable)
Gain Auto / Manual (software selectable)
Gamma Manual (software selectable)
White Balance -
Trigger Mode Free-run / Edge preset trigger / Pulse Width Trigger / Start & Stop Trigger (Software Selectable)
Input / Output USB2.0 High Speed
Power
- Input Voltage +5V through USB connector or 12Pin connector
- Consumption Less than 330 mA
Dimensions 50 (W) x 50 (H) x 35.8 (D) mm
Lens Mount CS Mount
Input / Output Connector 12-pin connector (Hirose) / 2.5 mm pin jack
Tripod 1/4”-20UNC depth 7 screw hole on top and bottom case, 4-M4 depth 4 screw holes on top, bottom and both side of case
Weight Approximately 130g
Temperature
- Operational 0 to 40 deg C
- Storage -30 to 65 deg C
Vibration 20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each
Shock Acceleration 70G, half amplitude 6ms, 3 directions 3 times each
Standard Compliancy EMS :EN61000-6-2, EMI :EN61000-6-3 (Class B)
RoHS RoHS Compliant