Name

Specifications

Model No STC-TB33USB-ASH
Imager ⅓” Interline VGA Monochrome Progressive CCD: ICX424AL
Total Picture Element 692 (H) x 504 (V)
Active Picture Element 640 (H) x 480 (V)
Chip Size 5.79 (H) x 4.89 (V) mm
Cell Size 7.40 (H) x 7.40 (V) µm
Scanning System Progressive
Scanning Methods Full Scanning, 1/1 Partial Scanning, ½ Partial Scanning, ¼ Partial Scanning, Variable Partial Scanning, Binning, Binning 1/1 Partial Scanning, Binning ½ Partial Scanning, Binning ¼ Partial Scanning, Binning Variable Partial Scanning
Pixel Frequency 24.5454 MHz
Maximum Frame Rate
- Full Scanning 59.94 fps
- 1/2 Partial 120.11 fps
- 1/4 Partial 240.22 fps
Resolution 640 (H) x 480 (V) (Full Scanning) 640 (H) x 224 (V) (1/2 Partial Scanning) 640 (H) x 80 (V) (1/4 Partial Scanning)
S/N Ratio (Standard Deviation) ≤ 10 digit (Factory Default Gain Setting)
Minimum Scene Illumination 0.08 Lux at F1.2
Sync System Internal
Electronic Shutter Auto / Manual (software selectable)
Gain Auto / Manual (software selectable)
Gamma Manual (software selectable)
White Balance -
Trigger Mode Free-run / Edge preset trigger / Pulse Width Trigger / Start & Stop Trigger (Software Selectable)
Input / Output USB2.0 High Speed (Mini B USB)
Power
- Input Voltage +5V through USB connector or 12Pin connector
- Consumption Less than 350 mA
Dimensions 50 (W) x 50 (H) x 35.8 (D) mm
Lens Mount CS Mount
Input / Output Connector 12 Pin Connector (Hirose) / 2.5 mm Pin Jack
Tripod 1/4”-20UNC depth 7 screw hole on top and bottom case, 4-M4 depth 4 screw holes on top and bottom case, 2-M4 depth 4 screw holes on both side of case
Weight Approximately 115g
Temperature
- Operational Temperature: 0 to 40 deg. C, RH: 0 to 85% (No Condensation)
- Storage Temperature: -30 to 65 deg. C, RH: 0 to 90% (No Condensation)
Vibration 20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each
Shock Acceleration 70G, half amplitude 6ms, 3 directions 3 times each
Standard Compliancy EMS :EN61000-6-2, EMI :EN61000-6-3 (Class B)
RoHS RoHS Compliant