Name

Specifications

Model No STC-MC202USB
Imager 1/1.8” Interline UXGA color progressive CCD: ICX274AQ (Sony)
Total Picture Element 1688 (H) x 1248 (V)
Effective Picture Element 1628 (H) x 1236 (V)
Chip Size 8.50 (H) x 6.80 (V) mm
Cell Size 4.40 (H) x 4.40 (V) µm
Scanning System Progressive
Resolution 1600 (H) x 1200 (V) (Full scanning) 1600 (H) x 544 (V) (1/2 partial scanning) 1600 (H) x 208 (V) (1/4 partial scanning)
Scanning Methods Full scanning, 1/1 partial scanning, ½ partial scanning, ¼ partial scanning, Variable partial scanning
Maximum Frame Rate
- Full Scanning 15.32 fps (Normal) / 7.66 fps (½ clock) / 3.83 fps (¼ clock)
- 1/2 Partial 30.63 fps (Normal) / 15.31 fps (½ clock) / 7.65 fps (¼ clock)
- 1/4 Partial 61.27 fps (Normal) / 30.63 fps (½ clock) / 15.31 fps (¼ clock)
Pixel Frequency 36.818 MHz (Normal) / 18.409 MHz (½ clock) / 9.20453 MHz (¼ clock)
Video Output 8bit / 10bit / 12bit
Minimum Scene Illumination 7.7 Lux at F1.2
Sync System Internal
Electronic Shutter Auto / Manual (software selectable)
- Normal 1/36,818,18 to 1/15.32 seconds
- 1/2 Clock 1/18,409,091 to 1/7.66 seconds
- 1/4 Clock 1/9,204,545 to 1/3.83 seconds
Gain Auto / Manual (software selectable)
Gamma Manual (software selectable)
White Balance Auto / Manual / One shot (software selectable)
Trigger Mode Free-run / Edge Preset Trigger / Pulse Width Trigger / Start & Stop Trigger (Software selectable)
Input / Output USB 2.0 High Speed
Power
- Input Voltage +5Vdc through USB connector (+4.4 to +5.25V)
- Consumption < 450 mA
Dimensions 28 (W) x 28 (H) x 42 (D) mm (excluding connector)
Lens Mount C Mount
Weight Approximately 45g
Interface Connector USB: mini-B USB connectorIO signal: 6pin connector (HR10A-7R-6PB or equivalent)
Temperature
- Operational 0 to 40 deg C
- Storage -30 to 65 deg C
Vibration 20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each
Shock Acceleration 70G, half amplitude 6ms, 3 directions 3 times each
Standard Compliancy EMS :EN61000-6-2, EMI :EN61000-6-3 (Class B)
RoHS RoHS Compliant