Model No STC-B83A
Imager ⅓” Interline XGA Monochrome Progressive CCD: ICX204AL
Total Picture Element 1077 (H) x 788 (V)
Active Picture Element XGA: 1024 (H) x 768 (V)
Chip Size 5.8 (H) x 4.92 (V) mm
Cell Size 4.65 (H) x 4.65 (V) µm
Scanning System Progressive
Scanning Method Full Scanning, Partial Full Scanning, ½ Partial Scanning,¼ Partial Scanning, Variable Partial Scanning, Binning, Binning Partial Scanning, Binning ½ Partial Scanning, Binning ¼ Partial Scanning, Binning Variable Partial Scanning
Vertical Frequency (Frame Rate) 29.59 Hz
Horizontal Frequency 23.23 kHz
Pixel Frequency 29.5 MHz
S/N Ratio  
- @ 8Bit Output ≤ 3 Digit (Gain 0 dB)
- @ 10Bit Output ≤ 10 Digit (Gain 0 dB)
Minimum Scene Illumination 0.14 Lux at F1.2
Sync System Internal / External
Video Output Digital 8 or 10 bit parallel low voltage output
Tap 1 Tap
Shutter Speed OFF, 1/5 to 1/96,000 seconds (Variable at every H and clock)
Gain 0 to 27 dB
Gamma 1.0
- Input Voltage 12Vdc ± 10%
- Consumption Less than 1.8 W
Trigger Mode Edge Preset Trigger (V-reset, Non-reset) Pulse Width Trigger (V-reset, Non-reset)
Communication RS232 via DF12-36DS-0.5V connector
Dimensions 28 (W) x 28 (H) x 33 (D) mm
Optical Filter No IR Cut Filter
Optical Center Accuracy Positional Accuracy in H and V Directions: +/- 0.31 mm Rotational Accuracy of H and V: +/- 2.1 deg.
- Case Aluminum Die Cast (ADC12)
- Tripod Polycarbonate ABS
Lens Mount C mount
Interface Connector DF12-36DS-0.5V (Hirose)
Tripod Tripod can be attached with 4 screws to the bottom plate
Weight Approximately 26g
Temperature and Humidity  
- Operational It depends on 1) how the system is assembled and 2) how heat conditions are managed w/in the system
- Storage Temperature: -30 to 65⁰C; Relative Humidity: 0 to 90% (No Condensation)
RoHS RoHS Compliant