Name |
Specifications |
Model No |
STC-A33A |
Imager |
⅓” Interline VGA Monochrome Progressive CCD: ICX424AL |
Total Picture Element |
692 (H) x 504 (V) |
Effective Picture Element |
659 (H) x 494 (V) |
Active Picture Element |
VGA: 648 (H) x 494 (V) |
Chip Size |
5.79 (H) x 4.89 (V) mm |
Cell Size |
7.4 (H) x 7.4 (V) µm |
Scanning System |
Progressive |
Scanning Method |
Full Scanning, Partial Full Scanning, ½ Partial Scanning, ¼ Partial Scanning, Variable Partial Scanning, Binning, Binning Partial Scanning Binning ½ Partial Scanning, Binning ¼ Partial Scanning Binning Variable Partial Scanning |
Vertical Frequency |
31.47 (30fps) / 62.94 (60fps) / 94.784 (90fps) Hz |
Horizontal Frequency |
15.7343 (30fps) / 31.4685 (60fps) / 47.2028 (90fps) kHz |
Pixel Frequency |
12.2727 (30fps) / 24.5454 (60fps) / 36.8181 (90fps) MHz |
S/N Ratio (Standard Deviation) |
56 dB (GAIN 0 dB) |
Minimum Illumination |
1 Lux at F1.4 |
Sync System |
Internal / External |
Video Output |
1.0 Vp-p / 75Ω, DC Coupling (0V) |
Shutter Speed |
|
- Dip Switch |
OFF; 1/200; 1/500; 1/1000; 1/2000; 1/4000; 1/8000; 1/20,000 second |
- Communication |
OFF; ½ to 1/100,000 sec. (Variable at every H and Clock) |
Gain |
0 to 27 dB |
Gamma |
1.0 / 0.45 |
Power Supply |
- Input Voltage |
DC 12V ± 10% |
- Consumption |
Less than 1.8 W |
Trigger Mode |
Edge Preset Trigger (V-reset, Non-reset) Pulse Width Trigger (V-reset, Non-reset) |
Communication |
RS232 via 12 Pin Connector |
Dimensions |
28(W) x 28(H) x 46.3(D)mm including lens mount and connector |
Optical Filter |
No IR Cut Filter |
Optical Center Accuracy |
Positional Accuracy in H and V directions: +/- 0.31mm |
Material |
|
- Case |
Front, Base, and Rear: Aluminum Die Cast (ADC12) Cover: Steel Sheet Covered with Zinc |
- Tripod |
Polycarbonate ABS |
Lens Mount |
C Mount |
Interface Connector |
HR10A-10R-12PB (Hirose) or equivalent |
Tripod |
Tripod can be attached to 4 plates (4 screws on the bottom plate, 3 screws on the other 3 plates) |
Weight |
Approximately 52g (Camera: 43g, Tripod: 9g) |
Temperature and Humidity |
|
- Operational |
Temperature: -5 to 50 deg C; Relative Humidity: 0 to 85% (No Condensation) |
- Storage |
Temperature: -30 to 65 deg C; Relative Humidity: 0 to 90% (No Condensation) |
Vibration |
20Hz to 200Hz to 20Hz (5 min./cycle), Acceleration 10G, 3 Directions 30 Minutes Each |
Shock |
Acceleration 70G, Half Amplitude 6ms, 3 Directions 3 Times Each |
Standard Compliancy |
EMS: EN61000-6-2, EMI: EN55011 (Class B) |
RoHS |
RoHS Compliant |