Model No STC-A202A
Imager 1/1.8” Interline UXGA monochrome progressive CCD ICX274AL
Total Picture Element 1688 (H) x 1248 (V)
Effective Picture Element 1628 (H) x 1236 (V)
Active Picture Element UXGA: 1620 (H) x 1220 (V)
Chip Size 8.5 (H) x 6.8 (V) mm
Cell Size 4.4 (H) x 4.4 (V) µm
Scanning System Progressive
Scanning Method Full scanning, Partial full scanning, ½ partial scanning, ¼ partial scanning, variable partial scanning Binning, Binning partial scanning, Binning ½ partial scanning, Binning ¼ partial scanning, Binning variable partial scanning
Vertical Frequency 15.3164 Hz
Horizontal Frequency 19.176 kHz
Pixel Frequency 36.8181 MHz
S/N Ratio (Standard Deviation) 56 dB (GAIN 0 dB)
Minimum Illumination 1 Lux at F1.4
Sync System Internal / External
Video Output 1.0 Vp-p / 75Ω, DC coupling (0V)
Shutter Speed  
- Dip Switch OFF, 1/200, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/20000 second
- Communication OFF, ½ to 1/100,000 sec. (Variable at every H and clock)
Gain 0 to 27 dB
Gamma 1.0 / 0.45
Power Supply
- Input Voltage DC 12V ± 10%
- Consumption Less than 3.0 W
Trigger Mode Edge Preset Trigger (V-reset, Non-reset) Pulse Width Trigger (V-reset, Non-reset
Communication RS232 via 12 Pin Connector
Dimensions 28(H) x 28(W) x 46.3(D) mm (including the lens mount and connector)
Optical Filter No IR Cut Filter
Optical Center Accuracy Positional Accuracy in H and V directions: +/- 0.31mm
- Case Front, Base, and Rear: Aluminum Die Cast (ADC 12) Cover: Steel Sheet Covered with Zinc
- Tripod Polycarbonate ABS
Lens Mount C Mount
Interface Connector HR10A-10R-12PB (Hirose) or Equivalent
Tripod Tripod can be attached to 4 plates(4 screws on the bottom plate, 3 screws on the other 3 plates)
Weight Approximately 52g (Camera: 43g, Tripod: 9g)
Temperature and Humidity  
- Operational Temperature: -5 to 45 deg C, Relative Humidity: 0 to 85% (No Condensation)
- Storage Temperature: -30 to 65 deg C, Relative Humidity: 0 to 90% (No Condensation)
Vibration 20 Hz to 200 Hz to 20 Hz (5 min./cycle), Acceleration 10G, 3 Directions 30 Minutes Each
Shock Acceleration 70G, Half Amplitude 6ms, 3 Directions 3 Times Each
Standard Compliancy EMS: EN61000-6-2, EMI: EN55011 (Class B)
RoHS RoHS Compliant