Name

Specifications

Model No STC-A152A
Imager ½” Interline SXGA Monochrome Progressive CCD: ICX205AL
Total Picture Element 1434 (H) x 1050 (V)
Effective Picture Element 1392 (H) x 1040 (V)
Active Picture Element SXGA: 1360 (H) x 1024 (V)
Chip Size 7.6 (H) x 6.2 (V) mm
Cell Size 4.65 (H) x 4.65 (V) µm
Scanning System Progressive
Scanning Method Full Scanning, Partial Full Scanning, ½ Partial Scanning, ¼ Partial Scanning, Variable Partial Scanning, Binning, Binning Partial Scanning, Binning ½ Partial Scanning Binning ¼ Partial Scanning, Binning Variable Partial Scanning
Vertical Frequency 15.28 (15fps) / 19.3 (19fps) Hz
Horizontal Frequency 15.998 (15fps) / 20.57 (19fps) kHz
Pixel Frequency 28.6363 (15fps) / 36.8181 (19fps) MHz
S/N Ratio (Standard Deviation) 56 dB (GAIN 0 dB)
Minimum Illumination 1 Lux at F1.4
Sync System Internal / External
Video Output 1.0 Vp-p / 75Ω, DC coupling (0V)
Shutter Speed  
- Dip Switch OFF; 1/200; 1/500; 1/1000; 1/2000; 1/4000; 1/8000; 1/20,000 second
- Communication OFF; ½ to 1/100,000 sec. (Variable at every H and Clock)
Gain 0 to 27 dB
Gamma 1.0 / 0.45
Power Supply
- Input Voltage DC 12V ± 10%
- Consumption Less than 2.5 W
Trigger Mode Edge Preset Trigger (V-reset, Non-reset) Pulse Width Trigger (V-reset, Non-reset
Communication RS232 via 12 Pin Connector
Dimensions 28(W) x 28(H) x 46.3(D)mm including lens mount and connector
Optical Filter No IR Cut Filter
Optical Center Accuracy Positional Accuracy in H and V directions: +/- 0.31mm
Material  
- Case Front, Base, and Rear: Aluminum Die Cast (ADC 12) Cover: Steel Sheet Covered with Zinc
- Tripod Polycarbonate ABS
Lens Mount C Mount
Interface Connector HR10A-10R-12PB (Hirose) or Equivalent
Tripod Tripod can be attached to 4 plates(4 screws on the bottom plate, 3 screws on the other 3 plates)
Weight Approximately 52g (Camera: 43g, Tripod: 9g)
Temperature and Humidity  
- Operational Temperature: -5 to 45 deg C, Relative Humidity: 0 to 85% (No Condensation)
- Storage Temperature: -30 to 65 deg C, Relative Humidity: 0 to 90% (No Condensation)
Vibration 20 Hz to 200 Hz to 20 Hz (5 min./cycle), Acceleration 10G, 3 Directions 30 Minutes Each
Shock Acceleration 70G, Half Amplitude 6ms, 3 Directions 3 Times Each
Standard Compliancy EMS: EN61000-6-2, EMI: EN55011 (Class B)
RoHS RoHS Compliant