Name

Specifications

Model No STC-HD133DV
Imager ⅓” Interline SXGA CCD: ICX445AQA
HD Active Picture Element 1280 (H) x 720 (V)
Chip Size 6.26 (H) x 5.01 (V) mm
Cell Size 3.75 (H) x 3.75 (V) μm
Minimum Scene Illumination 5 Lux at F1.2 at 50% IRE; AGC ON and 1/60 second shutter speed with IR Cut Filter
Resolution 600 TV Lines
Sync System Internal
Video Output DVI 1.0 compliant; RGB, 1280 (H) x 720 (V); 60 Hz / 59.94 Hz / 50 Hz
ALC Can be configured via the UART communication; w/ Optical Iris, Auto Electronic Shutter and AGC
Shutter Speed Adjustable shutter speed via the UART Communication; Up to Up to 1/100,000 seconds at 60Hz / 59.94 Hz or up to 1/83,947 seconds at 50Hz
Gain AGC or Fixed gain, selectable via the UART communication; Gain range: 0 to 18.3 dB
Digital Gain Up to 5.9866 dB
Gamma 1.0, 0.9, 0.8, 0.7, 0.6, 0.5, 0.45, 0.3 or manual gamma; Gamma selectable via the UART communication
White Balance Auto / Manual / Push-to-set; Selectable via the UART communication
Mirror Image Normal Image and Horizontal Flip are selectable mirror image via the UART communication
DSP Presets Twenty eight DSP presets Selectable picture mode via the UART communication
Line Generator Both horizontal and vertical available with all colors; Thickness adjustable via the UART communication
Shadow Mask Generator Horizontal and vertical with shading level adjustment via the UART communication
Communication +3.3V UART communication via 3.5ф stereo jack
Character Generator Built-in character generating function via the UART communication
Pixel Blemish Collection Up to 64 pixel blemish static collection
Power
- Input Voltage +9 to +15 Vdc (Typical: +12 Vdc)
- Consumption < 3.0 W
Dimensions 40 (W) x 40 (H) x 45.8 (D) mm
Optical Filter IR cut filter included
Lens Mount C mount
Interface Connector  
- Video Output HDMI connector
- Power Input 12V power jack; 2.1mm DC barrel power jack plug w/ center pin position
- External Control 3.5ф stereo jack w/ SW board
- Communication 3.5ф stereo jack
Button Primary SW Initial press button function: push-to-set white balance Initial hold button function: Auto white balance (Function is selectable via the UART communication)
Weight Approximately 120g
Temperature  
- Operational
0 to +40 deg. C
- Storage -30 to +65 deg. C
Vibration 20 Hz to 200 Hz to 20 Hz (5min./cycle), acceleration: 10G, 30min., XYZ each directions
Shock Acceleration: 38G, half amplitude 6ms, 3 times XYZ each directions
Standard Compliancy EMS: EN61000-6-2,EMI: 55011
RoHS RoHS Compliant