Name

Specifications

Model No STC-RCL33A-R3
Imager ⅓” Interline VGA Monochrome Progressive CCD: ICX424ALB
Total Picture Element 692 (H) x 504 (V)
Active Picture Element VGA: 648 (H) x 494 (V)
Chip Size 5.79 (H) x 4.89 (V) mm
Cell Size 7.4 (H) x 7.4 (V) µm
Scanning System Progressive
Scanning Methods Full, Partial full, ½ partial, ¼ partial, Variable partial, Binning (Partial, ½ partial, ¼ partial, Variable partial)
Horizontal Frequency 47.2028 kHz
Pixel Frequency 36.8181 MHz
S/N Ratio
- @ 8Bit Output ≤ 3 Digit (Gain 0 dB)
- @ 10Bit Output ≤ 10 Digit (Gain 0 dB)
Minimum Scene Illumination 0.11 Lux at F1.2
Sync System Internal / External
Video Output Digital 8 or10 bit CameraLink® (Base Configuration)
Tap 1 Tap
Shutter Speed OFF, ½ to 1/100,000 sec. (Variable at every H and clock)
Gain 0 to 27 dB
Gamma 1.0
Power  
- Input Voltage 12Vdc ± 10%
- Consumption < 3.5W
Trigger Mode Edge Preset Trigger (V-reset, Non-reset); Pulse Width Trigger (V-reset, Non-reset)
Communication RS232 via CameraLink® connector
Dimensions  
- CCU 28 (W) x 28 (H) x 36.5 (D) mm (not including connector)
- Head 12 (W) x 12 (H) x 44 (D) mm
Optical Filter No IR cut filter
Optical Center Accuracy Positional accuracy in H and V directions: +/- 0.31 mm Rotational accuracy of H and V: +/- 2.1 deg.
Material  
- Case Front, base, and rear: Aluminum die cast (ADC 12) Cover: Steel sheet covered with zinc
- Tripod Polycarbonate ABS
Lens Mount M10.5 (P = 0.5) (Male screw)
Interface Connector HR 10A-7R-6PB (Hirose) or equivalent
Weight Approximately 150g
Temperature and Humidity  
- Operating Temperature: -5 to 50 deg C; Relative Humidity: 0 to 85% (No condensation)
- Storage Temperature: -30 to 65 deg C; Relative Humidity: 0 to 90% (No condensation)
Vibration 10Hz to 150Hz, 0.35 half amplitude (Maximum acceleration 50m/s2); 3 directions 8 times each
Shock Acceleration 150m/s2, 6 directions 10 times each
Standard Compliancy EN61326; 1997/AnnexA+A1, 1998 (EMI: Class B) +A2: 2001
RoHS RoHS Compliant