Name

Specifications

Model No STC-CMB2MCL
Imager 2/3" 2 Megapixel monochrome CMOS (CMOSIS: CMV2000)
Active Picture Element 2048 (H) x 1088 (V)
Chip Size 11.264 (H) x 5.984 (V) mm
Cell Size 5.5 (H) x 5.5 (V) μm
Scanning System Progressive
Scanning Methods Full scanning, Variable partial scanning, Binning scanning, Binning variable partial scanning
Vertical Frequency (Frame Rate)
8-bit 10TAP: 340Hz / 10-bit MEDIUM: 150Hz / 12-bit BASE: 70 Hz (8-bit FULL / 8-bit MEDIUM / 8-bit BASE / 10-bit BASE is selectable via communication)
Horizontal Frequency 8-bit 10TAP: 372 kHz / 10-bit MEDIUM: 164 kHz / 12-bit BASE: 77 kHz
Pixel Frequency 8-bit 10TAP: 48 MHz / 10-bit MEDIUM: 21.25 MHz / 12bit BASE: 10.00 MHz
Sync System Internal
- @ 8Bit Output 10TAP / FULL / MEDIUM / BASE configuration
- @ 10Bit Output MEDIUM / BASE configuration
- @ 12Bit Output BASE configuration
Shutter Speed OFF, 45 seconds to 1/372,093 seconds (Variable at line)
Gamma 1.0
- Input Voltage 12Vdc ± 10%
Trigger Mode Edge preset trigger (V-reset, Non-reset); Pulse width trigger (V-reset, Non-reset)
Communication RS232 via Camera Link connector
Dimensions 50 (W) x 50 (H) x 42 (D) mm (Excluding the connector)
Optical Filter No IR cut filter
Material Aluminum (AC)
Lens Mount C mount
Interface Connector Camera Link connector: SDR connector x 2; Power/IO connector: HR10A-7R-6PB (Hirose) or equivalent
Storage Temperature -30 to 65 deg. C
Vibration 20Hz to 200Hz to 20Hz (5min.cycle), acceleration 10G, 3 directions 30 min. each
Shock Acceleration 70G, half amplitude 6ms, 3 directions 3 times each
Standard Compliancy EMS: EN61000-6-2, EMI: EN55011 (Class B)
RoHS RoHS Compliant