Model No STC-CLC83A-44
Imager ⅓” interline XGA color progressive CCD: ICX204AK
Total Picture Element 1077 (H) x 788 (V)
Active Picture Element 1024 (H) x 768 (V)
Chip Size 5.8 (H) x 4.92 (V) mm
Cell Size 4.65 (H) x 4.65 (V) μm
Scanning System Progressive
Scanning Methods Full, Partial full, ½ partial, ¼ partial, Variable partial
Vertical Frequency (Frame Rate)
43.77 Hz
Horizontal Frequency 34.84 kHz
Pixel Frequency 44.25 MHz
S/N Ratio
- @ 8Bit Output ≤ 3 Digit (Gain 0 dB)
- @ 10Bit Output ≤ 10 Digit (Gain 0 dB)
Minimum Scene Illumination 0.25 Lux at F1.2
Sync System Internal / External
Video Output Digital 8 or 10 bit CameraLink® (Base Configuration)
Tap 1 Tap
Shutter Speed OFF, 1/5 to 1/96,000 seconds (Variable at every H and clock)
Gain 0 ~ 27dB
Gamma 1.0
Power Supply
- Input Voltage 12 Vdc ± 10%
- Consumption < 1.8 W
Trigger Mode Edge preset trigger (V-reset, Non-reset); Pulse width trigger (V-reset, Non-reset)
Communication RS232 via CameraLink® connector
Dimensions 28(W) x 28(H) x 29.5(D) mm (Not including lens mount and the connector)
Optical Filter No IR cut filter
Optical Center Accuracy Positional accuracy in H and V directions: +/- 0.31 mm; Rotational accuracy of Hand V: +/- 2.1 deg.
- Case Front, base, and rear: Aluminum die cast (ADC12) Cover: Steel sheet covered with zinc
- Tripod Polycarbonate ABS
Lens Mount C mount
Interface Connector HR10A-7R-6PB (Hirose) or equivalent
Tripod Tripod can be attached to 4 plates (4screws on the bottom plate, 3 screws on the other 3 plates)
Weight Approximately 52g (Camera: 43g, tripod: 9g)
Temperature and Humidity  
- Operating Temperature: -5 to 50 deg C; Relative Humidity: 0 to 85% (No condensation)
- Storage Temperature: -30 to 65 deg C; Relative Humidity: 0 to 90% (No condensation)
Vibration 20 Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each
Shock Acceleration 70G, half amplitude 6ms, 3 directions 3 times each
Standard Compliancy EMS: EN61000-6-2, EMI: EN55011 (Class B)
RoHS RoHS compliant