Name

Specifications

Model No STC-CLC500A
Imager ⅔” interline 5.0 M Pixels color progressive CCD: ICX625AQ
Total Picture Element 2456 (H) x 2058 (V)
Active Picture Element 2448 (H) x 2058 (V)
Chip Size 9.93 (H) x 8.70 (V) mm
Cell Size 3.45 (H) x 3.45 (V) µm
Scanning System Progressive
Scanning Methods Full, Partial full, ½ partial, ¼ partial, Variable partial
Vertical Frequency (Frame Rate)
16 Hz
Horizontal Frequency 33.264 kHz
Pixel Frequency 64 MHz
S/N Ratio
- @ 8Bit Output ≤ 4 Digit (Gain 0 dB)
- @ 10Bit Output ≤ 15 Digit (Gain 0 dB)
- @ 12Bit Output ≤ 60 Digit (Gain 0 dB)
Minimum Scene Illumination 0.32 Lux @ F1.2
Sync System Internal
Video Output Digital 8, 10 or 12 bit Camera Link (Base Configuration)
Tap 2 Taps
Shutter Speed OFF, 1/8 to 1/209,000 sec. (Variable at every H and clock)
Gain 0 to 18.309 dB
Gamma 1.0
Power  
- Input Voltage 12 Vdc ± 10%
- Consumption < 4.0 W
Trigger Mode Edge preset trigger (V-reset, Non-reset); Pulse width trigger (V-reset, Non-reset)
Communication RS232 via CameraLink® connector
Dimensions 35 (W) x 35 (H) x 30.2 (D) mm (not including lens mount or the connector)
Optical Filter No IR cut filter
Material Aluminum (AC)
Lens Mount C mount
Power I/O Connector HR10A-7R-6PB (Hirose) or equivalent
Weight Approximately 80g
Temperature and Humidity  
- Operating Temperature: -5 to 40 deg C; Relative Humidity: 0 to 85% (No condensation)
- Storage Temperature: -30 to 65 deg C; Relative Humidity: 0 to 90% (No condensation)
Vibration 20 Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each
Shock Acceleration 38G, half amplitude 6ms, 3 directions 3 times each
Standard Compliancy EMS: EN61000-6-2, EMI: EN55022 (Class B)
RoHS RoHS compliant