Name |
Specifications |
Model No |
STC-CLC232A |
Imager |
1/1.8” interline UXGA color progressive CCD: ICX274AQ |
Total Picture Element |
1688 (H) x 1248 (V) |
Active Picture Element |
1620 (H) x 1236 (V) |
Chip Size |
4.4 (H) x 4.4 (V) mm |
Cell Size |
8.5 (H) x 6.8 (V) μm |
Scanning System |
Progressive |
Scanning Methods |
Full, Partial full, ½ partial, ¼ partial, Variable partial |
Vertical Frequency (Frame Rate)
|
30.854 Hz |
Horizontal Frequency |
38.352 kHz |
Pixel Frequency |
73.636 MHz |
S/N Ratio |
- @ 8Bit Output |
≤ 4 Digit (Gain 0 dB) |
- @ 10Bit Output |
≤ 15 Digit (Gain 0 dB) |
Minimum Scene Illumination |
0.31 Lux @ F1.2, 20 IRE; 0.92 Lux @ F1.2, 50 IRE |
Sync System |
Internal |
Video Output |
Digital 8 or 10 bit CameraLink® (Base Configuration) |
Tap |
1 Tap |
Shutter Speed |
OFF, 1/2 ~ 1/100,000 (Variable, can be set at every H and clock) |
Gain |
Adjustable Fixed Gain (0 ~ 25dB) |
Gamma |
1.0 |
Trigger Mode |
Pulse Width Trigger (V Reset, Non Reset); Edge Preset Trigger (V Reset, Non Reset) |
Communication |
RS232 via CameraLink® connector |
Optical Filter |
No IR cut filter |
Optical Center Accuracy |
Position accuracy of H and V direction: +/- 0.31mm |
Material |
Front, base, and rear: Aluminum die cast (ADC12) Cover: Steel sheet covered with zinc |
Lens Mount |
C mount |
Power I/O Connector |
- |
Vibration |
10G (20 to 200Hz) |
Shock |
70G (3 directions, 3 times each) |
Power |
|
- Input Voltage |
12 Vdc ± 10% |
- Consumption |
< 4.0W, 333mA |
Temperature and Humidity |
|
- Operational |
-5°C ~ 40°C (23°F ~ 104°F) |
- Storage |
-30°C ~ 65°C (-22°F ~ 140°F) |
Dimensions |
28(W) x 28(H) x 36.5(D) mm (1.1” x 1.1” x 1.44”) (Not including lens mount or the connector) |
Weight |
65.5g (2.31oz.) |