Name |
Specifications |
| Model No |
STC-CLC202A |
| Imager |
1/1.8” interline UXGA color progressive CCD: ICX274AQ |
| Total Picture Element |
1688 (H) x 1248 (V) |
| Active Picture Element |
1620 (H) x 1220 (V) |
| Chip Size |
8.5 (H) x 6.8 (V) mm |
| Cell Size |
4.4 (H) x 4.4 (V) µm |
| Scanning System |
Progressive |
| Scanning Methods |
Full, Partial full, ½ partial, ¼ partial, Variable partial |
| Vertical Frequency (Frame Rate)
|
15.3164 Hz |
| Horizontal Frequency |
19.176 kHz |
| Pixel Frequency |
36.8181 MHz |
| S/N Ratio |
| - @ 8Bit Output |
≤ 3 Digit (Gain 0 dB) |
| - @ 10Bit Output |
≤ 10 Digit (Gain 0 dB) |
| Minimum Scene Illumination |
0.08 Lux @ F1.2, 50 IRE |
| Sync System |
Internal / External (HD/VD) |
| Video Output |
Digital 8 or 10 bit CameraLink® (Base Configuration) |
| Tap |
1 Tap |
| Shutter Speed |
OFF, 1/4 to 1/120,000 seconds (Variable at every H and clock) |
| Gain |
0 ~ 27dB |
| Gamma |
1.0 |
| Power Supply |
| - Input Voltage |
12 Vdc ± 10% |
| - Consumption |
< 3.0 W |
| Trigger Mode |
Edge preset trigger (V-reset, Non-reset); Pulse width trigger (V-reset, Non-reset) |
| Communication |
RS232 via CameraLink® connector |
| Dimensions |
28(W) x 28(H) x 29.5(D) mm (Not including lens mount and the connector) |
| Optical Filter |
No IR cut filter |
| Optical Center Accuracy |
Positional accuracy in H and V directions: +/- 0.31 mmRotational accuracy of Hand V: +/- 2.1 deg. |
| Material |
|
| - Case |
Front, base, and rear: Aluminum die cast (ADC12) Cover: Steel sheet covered with zinc |
| - Tripod |
Polycarbonate ABS |
| Lens Mount |
C mount |
| Interface Connector |
HR10A-7R-6PB (Hirose) or equivalent |
| Tripod |
Tripod can be attached to 4 plates (4screws on the bottom plate, 3 screws on the other 3 plates) |
| Weight |
Approximately 52g (Camera: 43g, tripod: 9g) |
| Temperature and Humidity |
|
| - Operational |
Temperature: -5 to 45 deg C; Relative Humidity: 0 to 85% (No condensation) |
| - Storage |
Temperature: -30 to 65 deg C; Relative Humidity: 0 to 90% (No condensation) |
| Vibration |
20 Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each |
| Shock |
Acceleration 70G, half amplitude 6ms, 3 directions 3 times each |
| Standard Compliancy |
EMS: EN61000-6-2, EMI: EN55011 (Class B) |
| RoHS |
RoHS compliant |