Name |
Specifications |
| Model No |
STC-CL500A |
| Imager |
⅔” interline 5.0 M Pixels monochrome progressive CCD: ICX625AL |
| Total Picture Element |
2456 (H) x 2058 (V) |
| Active Picture Element |
2448 (H) x 2058 (V) |
| Chip Size |
9.93 (H) x 8.70 (V) mm |
| Cell Size |
3.45 (H) x 3.45 (V) µm |
| Scanning System |
Progressive |
| Scanning Methods |
Full, Partial full, ½ partial, ¼ partial, Variable partial,Binning (Partial, ½ partial, ¼ partial, Variable partial) |
| Vertical Frequency (Frame Rate)
|
16 Hz |
| Horizontal Frequency |
33.264 kHz |
| Pixel Frequency |
64 MHz |
| S/N Ratio |
| - @ 8Bit Output |
≤ 4 Digit (Gain 0 dB) |
| - @ 10Bit Output |
≤ 15 Digit (Gain 0 dB) |
| - @ 12Bit Output |
≤ 60 Digit (Gain 0 dB) |
| Minimum Scene Illumination |
0.24 Lux at F1.2 |
| Sync System |
Internal |
| Video Output |
Digital 8, 10 or 12 bit Camera Link (Base Configuration) |
| Tap |
2 Taps |
| Shutter Speed |
OFF, 1/8 to 1/209,000 sec. (Variable at every H and clock) |
| Gain |
0 to 18.309 dB |
| Gamma |
1.0 |
| Power |
|
| - Input Voltage |
12 Vdc ± 10% |
| - Consumption |
< 4.0 W |
| Trigger Mode |
Edge preset trigger (V-reset, Non-reset); Pulse width trigger (V-reset, Non-reset) |
| Communication |
RS232 via CameraLink® connector |
| Dimensions |
35 (W) x 35 (H) x 30.2 (D) mm (not including lens mount or the connector) |
| Optical Filter |
No IR cut filter |
| Material |
Aluminum (AC) |
| Lens Mount |
C mount |
| Power I/O Connector |
HR10A-7R-6PB (Hirose) or equivalent |
| Weight |
Approximately 80g |
| Temperature and Humidity |
|
| - Operating |
Temperature: -5 to 40 deg C; Relative Humidity: 0 to 85% (No condensation) |
| - Storage |
Temperature: -30 to 65 deg C; Relative Humidity: 0 to 90% (No condensation) |
| Vibration |
20 Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each |
| Shock |
Acceleration 38G, half amplitude 6ms, 3 directions 3 times each |
| Standard Compliancy |
EMS: EN61000-6-2, EMI: EN55022 (Class B) |
| RoHS |
RoHS compliant |