Name

Specifications

Model No STC-CL33A
Imager ⅓” interline VGA monochrome progressive CCD: ICX424AL
Total Picture Element 692 (H) x 504 (V)
Active Picture Element 648 (H) x 494 (V)
Chip Size 5.79 (H) x 4.89 (V) mm
Cell Size 7.4 (H) x 7.4 (V) µm
Scanning System Progressive
Scanning Methods Full, Partial full, ½ partial, ¼ partial, Variable partial, Binning (Partial, ½ partial, ¼ partial, Variable partial)
Vertical Frequency (Frame Rate)
31.47 (30fps) / 62.94 (60fps) / 94.784 (90fps) Hz
Horizontal Frequency 15.7343 (30fps) / 31.4685 (60fps) / 47.2028 (90fps) kHz
Pixel Frequency 12.2727 (30fps) / 24.5454 (60fps) / 36.8181 (90fps) MHz
S/N Ratio
- @ 8Bit Output ≤ 3 Digit (Gain 0 dB)
- @ 10Bit Output ≤ 10 Digit (Gain 0 dB)
Minimum Scene Illumination 0.12 Lux @ F1.2, 50 IRE
Sync System Internal / External
Video Output Digital 8 or 10 bit CameraLink® (Base Configuration)
Tap 1 Tap
Shutter Speed OFF, 1/3 ~ 1/40,000 sec. (30fps); 1/7 ~ 1/80,000 sec. (60fps); 1/11 ~ 1/120,000 sec. (90fps); (Variable at every H and clock)
Gain 0 ~ 27dB
Gamma 1.0
Power Supply
- Input Voltage 12 Vdc ± 10%
- Consumption < 1.8 W
Trigger Mode Edge preset trigger (V-reset, Non-reset) Pulse width trigger (V-reset, Non-reset)
Communication RS232 via CameraLink® connector
Dimensions 28 (W) x 28 (H) x 29.5 (D) mm (Not including lens mount and the connector)
Optical Filter No IR cut filter
Optical Center Accuracy Positional accuracy in H and V directions: +/- 0.31 mm Rotational accuracy of Hand V: +/- 2.1 deg.
Material  
- Case Front, base, and rear: Aluminum die cast (ADC12) Cover: Steel sheet covered with zinc
- Tripod Polycarbonate ABS
Lens Mount C mount
Interface Connector HR10A-7R-6PB (Hirose) or equivalent
Tripod Tripod can be attached to 4 plates (4screws on the bottom plate, 3 screws on the other 3 plates)
Weight Approximately 52g (Camera: 43g, tripod: 9g)
Temperature and Humidity  
- Operational Temperature: -5 to 50 deg C; Relative Humidity: 0 to 85% (No condensation)
- Storage Temperature: -30 to 65 deg C; Relative Humidity: 0 to 90% (No condensation)
Vibration 20 Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each
Shock Acceleration 70G, half amplitude 6ms, 3 directions 3 times each
Standard Compliancy EMS: EN61000-6-2, EMI: EN55011 (Class B)
RoHS RoHS compliant