Name

Specifications

Model No STC-CL338A
Imager 1/3" Interline VGA color progressive CCD: KAI-0340DCM (Kodak)
Active Picture Element VGA: 644 (H) x 484 (V)
Chip Size 5.87 (H) x 4.71 (V) mm
Cell Size 7.4 (H) x 7.4 (V) µm
Scanning System Progressive
Scanning Methods Full, Partial full, ½ partial, ¼ partial, Variable partial, Binning (Partial, ½ partial, ¼ partial, Variable partial)
Vertical Frequency (Frame Rate)
240.9 Hz
Horizontal Frequency 119.1 kHz
Pixel Frequency 48 MHz
S/N Ratio
- @ 8Bit Output ≤ 4 Digit (Gain 0 dB)
- @ 10Bit Output ≤ 15 Digit (Gain 0 dB)
- @ 12Bit Output ≤ 60 Digit (Gain 0 dB)
Minimum Scene Illumination 3.5 Lux at F1.2
Sync System Internal
Video Output Digital 8, 10 or 12 bit Camera Link (Base Configuration)
Tap 1 Tap / 2 Tap
Shutter Speed OFF, 1/8 to 1/60,000 seconds (Variable at every H and clock)
Gain 0 to 18.309 dB
Gamma 1.0
Power  
- Input Voltage 12 Vdc ± 10%
- Consumption < 3.6W
Trigger Mode Edge preset trigger (V-reset, Non-reset); Pulse width trigger (V-reset, Non-reset)
Communication RS232 via CameraLink® connector
Dimensions 35 (W) x 35 (H) x 48.2 (D) mm (Excluding the connector)
Optical Filter No IR cut filter
Material Aluminum (AC)
Lens Mount C mount
Power I/O Connector HR10A-7R-6PB (Hirose) or equivalent
Weight Approximately 104g
Temperature and Humidity  
- Operating -5°C ~ 40°C
- Storage -30°C ~ 65°C
Vibration 20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30min. each, 6 cycles
Shock Acceleration 38G, half amplitude 6ms, 3 directions, 3 times each
Standard Compliancy EMS: EN61000-6-2, EMI: EN55022 (Class B)
RoHS RoHS compliant