Name

Specifications

Model No STC-CL202A
Imager 1/1.8” interline UXGA monochrome progressive CCD: ICX274AL
Total Picture Element 1688 (H) x 1248 (V)
Active Picture Element 1620 (H) x 1220 (V)
Chip Size 8.5 (H) x 6.8 (V) mm
Cell Size 4.4 (H) x 4.4 (V) µm
Scanning System Progressive
Scanning Methods Full, Partial full, ½ partial, ¼ partial, Variable partial, Binning (Partial, ½ partial, ¼ partial, Variable partial)
Vertical Frequency (Frame Rate)
15.3164 Hz
Horizontal Frequency 19.176 kHz
Pixel Frequency 36.8181 MHz
S/N Ratio
- @ 8Bit Output ≤ 3 Digit (Gain 0 dB)
- @ 10Bit Output ≤ 10 Digit (Gain 0 dB)
Minimum Scene Illumination 0.06 Lux @ F1.2, 50 IRE
Sync System Internal / External (HD/VD)
Video Output Digital 8 or 10 bit CameraLink® (Base Configuration)
Tap 1 Tap
Shutter Speed OFF, 1/4 to 1/120,000 seconds (Variable at every H and clock)
Gain 0 ~ 27dB
Gamma 1.0
Power Supply
- Input Voltage 12 Vdc ± 10%
- Consumption < 3.0W, 250mA
Trigger Mode Edge preset trigger (V-reset, Non-reset); Pulse width trigger (V-reset, Non-reset)
Communication RS232 via CameraLink® connector
Material
- Case Front, base, and rear: Aluminum die cast (ADC12) Cover: Steel sheet covered with zinc
- Tripod Polycarbonate ABS
Lens Mount C mount
Interface Connector HR10A-7R-6PB (Hirose) or equivalent
Tripod Tripod can be attached to 4 plates (4screws on the bottom plate, 3 screws on the other 3 plates)
Weight Approximately 52g (Camera: 43g, tripod: 9g)
Temperature and Humidity  
- Operational Temperature: -5 to 45 deg C; Relative Humidity: 0 to 85% (No condensation)
- Storage Temperature: -30 to 65 deg C; Relative Humidity: 0 to 90% (No condensation)
Vibration 20 Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each
Shock Acceleration 70G, half amplitude 6ms, 3 directions 3 times each
Standard Compliancy EMS: EN61000-6-2, EMI: EN55011 (Class B)
RoHS RoHS compliant