Name

Specifications

Model No STC-E43A
Imager Sensor ⅓” Interline Monochrome EIA CCD: ICX408AL
Total Picture Element 811 (H) x 508 (V)
Active Picture Element 768 (H) x 494 (V)
Chip Size (mm) 5.59 (H) x 4.68 (V) mm
Cell Size (µm) 6.35 (H) x 7.40 (V) µm
Scanning System 2:1 Interlace
Vertical Frequency (Frame Rate) 59.94 Hz
Horizontal Frequency 15.734 kHz
Pixel Frequency 14.318 MHz
Resolution 570 TV Lines
S/N Ratio 56 dB (GAIN 0dB)
Minimum Scene Illumination 1 Lux at F1.4
Sync System Internal / External
Video Output 1.0Vp-p / 75Ω, DC coupling
Shutter Speed  
- Dip Switch OFF; 1/60; 1/100; 1/120; 1/250; 1/500; 1/1000; 1/2000; 1/4000; 1/8000; 1/10,000; 1/20,000; 1/100,000 second
- Communication OFF; 1/60 to 1/100,000 second(Variable at every Hand Clock)
Integration Field / Frame
Gain 0 to 27 dB
Gamma 1/ 0.45
Power  
- Input Voltage 12Vdc +/- 10%
- Consumption Less than 1.8W
Communication RS232 via 12 Pin Connector
Dimensions 28 (W) x 28 (H) x 46.3 (D)mm including lens mount and the connector
Optical Filter No IR Cut Filter
Optical Center Accuracy Positional Accuracy in Hand V Directions: +/- 0.31 mm
Material  
- Case Front, base, and rear: Aluminum Die Cast (ADC12)
- Tripod Polycarbonate ABS
Lens Mount C Mount
Interface Connector HR10A-10R-12PB (Hirose) or equivalent
Tripod Tripod can be attached to 4 plates(4 screws on the bottom plate, 3 screws on the other 3 plates)
Weight Approximately 52g (Camera: 43g, Tripod: 9g)
Temperature and Humidity  
- Operating Temperature: -5 to 50 deg C; Relative Humidity: 0 to 90% (No Condensation)
- Storage Temperature: -30 to 65 deg C; Relative Humidity: 0 to 90% (No Condensation)
Vibration 20Hz to 200Hz to 20Hz (5min./cycle), Acceleration 10G, 3 Directions 30 Minutes Each
Shock Acceleration 70G, half amplitude 6ms, 3 directions 3 times each
Standard Compliancy EMS: EN61000-6-2, EMI: EN55011 (Class B)
RoHS RoHS Compliant