Name |
Specifications |
Model No |
STC-E42A |
Imager Sensor |
½” Interline Monochrome EIA CCD: ICX418AL |
Total Picture Element |
811 (H) x 508 (V) |
Active Picture Element |
768 (H) x 494 (V) |
Chip Size (mm) |
7.40 (H) x 5.95 (V) mm |
Cell Size (µm) |
8.4 (H) x 9.8 (V) µm |
Scanning System |
2:1 Interlace |
Vertical Frequency (Frame Rate) |
59.94 Hz |
Horizontal Frequency |
15.734 kHz |
Pixel Frequency |
14.318 MHz |
Resolution |
570 TV Lines |
S/N Ratio |
56 dB (GAIN 0dB) |
Minimum Scene Illumination |
1 Lux at F1.4 |
Sync System |
Internal / External |
Video Output |
1.0Vp-p / 75Ω, DC coupling |
Shutter Speed |
|
- Dip Switch |
OFF; 1/60; 1/100; 1/120; 1/250; 1/500; 1/1000; 1/2000; 1/4000; 1/8000; 1/10,000; 1/20,000; 1/100,000 second |
- Communication |
OFF; 1/60 to 1/100,000 second (Variable at every H and Clock) |
Integration |
Field / Frame |
Gain |
1/0.45 |
Power |
|
- Input Voltage |
12Vdc +/- 10% |
- Consumption |
Less than 1.8W |
Communication |
RS232 via 12 Pin Connector |
Dimensions |
28 (W) x 28 (H) x 46.3 (D)mm including lens mount and the connector |
Optical Filter |
No IR Cut Filter |
Optical Center Accuracy |
Positional Accuracy in Hand V Directions: +/- 0.31 mm |
Material |
|
- Case |
Front, base, and rear: Aluminum Die Cast (ADC12) |
- Tripod |
Polycarbonate ABS |
Lens Mount |
C Mount |
Interface Connector |
HR10A-10R-12PB (Hirose) or equivalent |
Tripod |
Tripod can be attached to 4 plates(4 screws on the bottom plate, 3 screws on the other 3 plates) |
Weight |
Approximately 52g (Camera: 43g, Tripod: 9g) |
Temperature and Humidity |
|
- Operating |
Temperature: -5 to 50 deg C; Relative Humidity: 0 to 90% (No Condensation) |
- Storage |
Temperature: -30 to 65 deg C; Relative Humidity: 0 to 90% (No Condensation) |
Vibration |
20Hz to 200Hz to 20Hz (5min./cycle), Acceleration 10G, 3 Directions 30 Minutes Each |
Shock |
Acceleration 70G, Half Amplitude 6ms, 3 Directions 3 Times Each |
Standard Compliancy |
EMS: EN61000-6-2, EMI: EN55011 (Class B) |
RoHS |
RoHS Compliant |