|
A color 2 megapixel (1600 x
1200) CMOS camera with USB2.0 interface. It is designed
for capturing, streaming and storing high quality digital
images.
Features
- Low power consumption
- 1600 x 1200 active imaging pixels
- Optional external trigger connector
- Rolling shutter
- Small size
- USB2.0 interface
- Cost effective
Output
Video and Camera Control Characteristics
| Maximum
resolutions of output window: |
1600 x
1200, full resolution mode |
| Frame rate at resolution
(48 MHz): |
10 fps at 1600 x
1200
14 fps at 1280 x 1024
22.7 fps at 1024 x 768
34.6 fps at 800 x 600
37 fps at 768 x 576
50 fps at 640 x 480
79.6 fps at 400 x 400
145 fps at 320 x 240 |
| Output bits per
pixel: |
8/10 |
Lookup table:
(only for 8 bit mode) |
Software, 10 bits of imaging
chip's ADC to 8 bits of output |
| Pixel rates: |
12 MHz, 24 MHz |
Exposure range
(at highest resolution), ms: |
min: 0.07 (at 24 MHz)
max: more than 2.5 sec (with fps decrease) |
| Pixel gain control: |
Programmable (Hardware): 48 gain
levels from 1 to 15
Gain controls for R, G, B: 48 gain levels from 1
to 15 |
| Output window modes: |
View port (from 1600 x
1200 to 8 x 8 with 2 pixels/2 lines step positioning)
Frame Decimation (1:1, 1:2, 1:4, 1:8)
Horizontal "mirroring", hardware
Vertical "flipping", hardware |
| Gamma, brightness
and contrast control: |
Programmable with lookup table,
software gamma correction |
Imaging Chip Characteristics
| Type: |
Color ½ inch 2 megapixel
CMOS sensor |
| Pixel size: |
4.2 µm x
4.2 µm |
| Image array size: |
8.4 mm diagonal |
| Shutter: |
Rolling shutter |
| Scanning mode: |
Progressive |
| ADC resolution: |
10 bits |
| Sensitivity: |
1.2 V/lux-sec (550nm) |
| Dynamic Range: |
>61dB |
Camera Electrical Charateristics
| Supply voltage: |
5 V supplied by USB2.0 interface
|
| Supply current: |
90 - 160 mA |
| Maximum power consumption: |
0.45 - 0.8 W |
Camera Interface Charateristics
| Interface Type: |
USB2.0, 480 Mbps |
| Connector Type: |
USB mini-B, 5 pin |
System Requirements
| Operating System: |
Windows XP Professional SP1 or
SP2
Windows Server 2003 SP1 |
| Processor: |
Pentium 4, 3 GHz or higher, HT
or dual-core recommended |
| RAM: |
256 MB, recommended 384 MB |
| Hard Disk Space: |
5 MB for installation plus additional
space for captured images |
| Video: |
24 bit True Color, 8 MB video
memory |
| Hardware Interface: |
USB2.0 Host Controller, recommended
Intel integrated host controller (VIA-based USB controller is not recommended)
At least one USB2.0 port for connection. |
|
